HOMMAND Electric Toothbrush Holder Review: a simple wall mount that actually stays put

I’ve been using the HOMMAND Electric Toothbrush Holder (the 2-pack, white) for a few weeks now, and the short version is: it does what it’s supposed to do without any fuss. I bought it because I was tired of that disgusting puddle of water and toothpaste sludge at the bottom of a regular toothbrush cup. With two electric toothbrushes on a small sink, the area looked messy and was annoying to clean. This holder seemed like a cheap way to clear the sink and keep things a bit more hygienic.

Installation was pretty straightforward. I stuck one in my main bathroom on smooth tiles and the other on a painted cabinet door. Both surfaces were wiped clean beforehand. The 3M-style adhesive backing is strong and feels reliable, not like those random cheap sticky pads that peel off after two days. I pressed them down for a good 30 seconds and left them alone for a few hours before hanging the toothbrushes, just to be safe.

In daily use, the main thing I noticed is how much easier it is to keep the area clean. Instead of scrubbing out a cup, I just pop off the bottom piece of the holder, rinse it under the tap, and clip it back on. It takes maybe 20 seconds. The funnel-style base does collect some water and toothpaste, but at least it’s not hidden and gross anymore, and it’s easier to reach. It’s not magic, you still need to clean it, but it’s faster and less annoying than a traditional cup.

So far, nothing has fallen off the wall, nothing has cracked, and the holders haven’t loosened. It’s not some fancy high-end bathroom accessory, it’s just a simple plastic mount that keeps electric toothbrushes upright and out of the way. If that’s what you want, this thing gets the job done pretty well. If you’re hoping it will make your bathroom look like a spa, it won’t, but it will make it tidier and easier to wipe down.

For what it costs, the HOMMAND holder offers good value for money. You’re getting two units, each capable of holding a full-size electric toothbrush, with a decent adhesive system and a design that actually solves a small but real daily problem: the gross toothbrush area. If you think about how often you use an electric toothbrush (twice a day, every day), paying a relatively low price to make that setup cleaner and more organized feels fair.

Compared to some other options I’ve tried, this hits a nice middle ground. I’ve had super cheap generic holders where the adhesive failed in a week and the plastic felt like it would snap if you looked at it wrong. I’ve also seen more expensive metal wall mounts that look nicer but require drilling, which I don’t want to do in rented places. This HOMMAND holder sits in between: not fancy, but reliable, and you don’t need tools or a landlord’s permission to put it up.

The fact that it’s compatible with pretty much any electric toothbrush handle up to about 36 mm is another plus. If you change brands in the future, you probably won’t have to replace the holder. Also, having two in the pack is handy: one for each adult, or one for bathroom and one for travel home, or even one for toothbrush and one for toothpaste if you really want to get everything off the sink. You’re not paying for features you don’t need; it’s just a holder that works.

If you’re on a tight budget and don’t mind the classic cup on the sink, you could obviously skip it, because this is a convenience item. But if the daily slime in the cup annoys you even half as much as it annoyed me, the price feels justified. You’re basically paying a moderate amount for less cleaning hassle and a tidier sink. In that sense, the value is pretty solid: nothing flashy, but practical and not overpriced for what it delivers.

The design is pretty straightforward: a back plate with adhesive, a cradle for the toothbrush handle, and a funnel-shaped base that catches drips. The main idea is to hold the toothbrush vertically and let water run down into the removable bottom piece. It’s not complicated, but it’s actually thought through better than those flat holders where water just sits and rots. The open sides give some airflow, so the handle dries faster instead of staying constantly damp.

The adjustable arms on the sides are the interesting part. They slide to adapt to different handle thicknesses, which is why it works with most electric toothbrushes. I tested it with: an Oral-B Pro, an Oral-B iO, a Sonicare, and a cheap supermarket-branded brush. All of them could be held securely after a bit of tweaking. It’s not a perfect precision fit; you just adjust until the brush doesn’t wobble. Once set, you don’t really touch the arms again. For kids, I’d just be careful they don’t yank the brush out sideways, because that’s when plastic clips usually suffer.

Visually, the holder is as plain as it gets: white plastic, soft edges, no logos in your face. If your bathroom is already cluttered with bottles and devices, this thing doesn’t add visual noise. It just sits on the wall and does its job. Because it’s compact, you can line up two or three in a row without taking up much wall space, which is nice for families or shared bathrooms. The dimensions are small enough that even in a narrow bathroom you can put it beside the mirror or above the sink without banging into it.

In practice, the design works. The brush goes in and out with one hand, the base catches gunk, and the whole thing is easy to disassemble. It’s not pretty or stylish, but it’s functional. The only design downside for me is that if you’re clumsy or have kids who pull hard, the little clip that holds the base might be the weak point over time. So far mine is fine, but I can see that being the first thing to break if anything does. Still, considering the price and the overall layout, the design is pretty solid and focused on daily use, not just looking good in photos.

The holder is made of ABS plastic, which is basically standard hard plastic you see in lots of household items. It’s light, doesn’t bend easily, and handles moisture without any issue. In the bathroom, that’s what you want: something that doesn’t rust and doesn’t swell. After a few weeks in a steamy bathroom with daily showers, there’s no discoloration, no warping, and no weird smell. It’s not luxury material, but for a toothbrush holder, it’s perfectly fine.

The star of the show is actually the adhesive backing. It uses a 3M-style sticker, and this is where a lot of cheap holders usually fail. With this one, once you stick it on a clean, smooth surface (tile, glass, glossy cabinet), it stays there. I deliberately overloaded one holder with a heavier item just to see what happened, and it didn’t budge. They say it holds up to 2 kg, and while I didn’t measure that exactly, it feels more than strong enough for a toothbrush and a bit of movement several times a day.

One important point: it’s not meant for rough or dusty walls like bare plaster or textured paint. I tried sticking a spare piece of the adhesive backing on a matte, slightly textured wall, and that one didn’t hold well. So if your bathroom walls are not smooth, you’ll want to stick to tiles, glass, or a flat cabinet door. Used correctly, the adhesive feels trustworthy. I’ve had other products where the sticker edges start peeling after a week; here, everything is still tightly sealed to the tile.

In terms of build, the clips that hold the base and the adjustable arms feel reasonably sturdy for plastic. You can feel that if you twist them too aggressively, they could break, but under normal use they’re fine. I’ve taken the base off and put it back on many times for cleaning, and the clip still locks in with a solid click. So overall, the materials are what you’d expect in this price range: no metal, no fancy finishes, but solid plastic and a good adhesive that together make a practical, low-maintenance holder.

Durability was my main concern when I bought this, because a lot of cheap wall-mounted stuff falls off or cracks after a few weeks. So far, the HOMMAND holder has held up better than I expected. The adhesive is still firmly attached to the tile and cabinet, with no edges lifting or corners peeling. I’ve hung and removed the toothbrush multiple times a day, and the mount doesn’t wobble or feel loose. It genuinely feels like it could stay there for years if you don’t mess with it.

The plastic itself hasn’t shown any cracks or discoloration. The bathroom I tested it in gets pretty steamy with hot showers, and I was half expecting the plastic to get brittle or the clips to soften, but nothing like that so far. The base still clicks in and out cleanly. That said, it’s still plastic, so if you slam the toothbrush in or pull it out sideways like a maniac, you can probably break the arms or the base clip. It’s tough enough for normal use, but it’s not indestructible.

I also tried removing one holder from a tile to see what happens. It’s not designed to be moved, and you can tell. It took some effort to peel it off, and it left a bit of sticky residue on the tile, which I had to scrub with cleaner. The holder itself survived, but the adhesive was done. So realistically, once you stick it somewhere, plan to keep it there. It’s durable in place, not really meant to be repositioned every few weeks.

Judging by my experience and some long-term user feedback I checked, the weak point over time is likely the little clips if you have rough handling or small kids yanking on it. But used reasonably, it seems to last. People mention having them up for years, and I can see that being true given how solid mine feels after weeks of daily use. For the price and the type of product, durability is pretty solid, as long as you install it correctly and don’t treat it like gym equipment.

In the pack, you get two identical wall-mounted holders. Each holder is basically four plastic pieces that clip together, plus the adhesive pad already stuck on the back plate. No screws, no tools, no manual needed beyond a tiny sheet of instructions that you’ll probably glance at once and throw away. It’s very basic, but in a good way: you don’t have to figure out weird parts or hardware. Everything is obvious when you look at it.

Each unit is sized for one electric toothbrush, though you can also stick a tube of toothpaste in there if it fits the diameter (they say up to 36 mm). I tried it with an Oral-B electric toothbrush and a Philips Sonicare, both fit fine after adjusting the side arms. I also tested a standard toothpaste tube, which held okay, but I ended up just using both holders for toothbrushes because that’s what I actually needed. The adjustable arms slide in and out, so you can tighten or loosen the grip around the handle.

The finish is a plain white ABS plastic, nothing fancy. It doesn’t scream high-end design, but it’s neutral enough that it blends into most bathrooms. If your tiles or walls are white or light-colored, it just disappears visually, which I liked. The plastic is light but doesn’t feel flimsy, and there are no sharp edges. It’s clearly built for function, not for looks, but it doesn’t look cheap in a bad way either.

Overall, the presentation is simple and practical: two holders, ready to stick, no drilling and no extra bits. If you’re expecting some heavy, metal mount with packaging that feels premium, you’ll be disappointed. If you just want a no-nonsense way to hang electric toothbrushes on the wall, what’s in the box is exactly that. For the price, getting two units that are actually usable and easy to understand feels like decent value.

On the practical side, yes, it keeps the sink area cleaner and more organized. Before using this holder, my electric toothbrushes lived in a cup or just lay on the sink. The cup would collect a nasty mix of water and toothpaste, and the brush handles were always a bit sticky. With this holder, the handles are upright, the drips go into the funnel-shaped base, and I can see when it needs a quick rinse. It doesn’t magically stop toothpaste from getting everywhere, but it makes the mess easier to control and clean.

The drainage design works as expected. After brushing, some water and foam run down into the bottom tray. If you ignore it for a week, it will still get gross, but cleaning takes 30 seconds: slide off the tray, rinse, maybe a quick scrub with a sponge if you’re picky, and snap it back on. Compared to scrubbing the inside of a deep cup, this is much faster and less annoying. The open design also lets the handle dry faster instead of staying in a humid, enclosed space.

As for holding the toothbrush, the grip is stable enough. I’ve never had a brush fall out, even when I bumped into it. You push the handle down into the holder, and it stays there. When you pull it out, there’s a bit of resistance from the arms, but nothing that feels like you’re about to break it. For kids, I’d show them how to pull straight up instead of sideways, but that’s about it. For normal adult use, it just works, no drama.

Another small thing: saving space. Getting the bulky electric toothbrush base off the sink frees up space for soap, skincare bottles, or whatever else normally clutters the area. In a small bathroom, that’s genuinely useful. You don’t have to move the toothbrush around every time you wipe the sink. So in terms of effectiveness, it ticks all the boxes: it holds the brush, keeps it upright, helps keep things cleaner, and reduces clutter. Not perfect, but clearly better than the old cup setup I was using.